Specification check

jet hand chain hoist lift

This page helps buyers state rated load, lift height and duty before requesting factory quotes on a jet hand chain hoist lift search. The word lift here means hook travel, not a vehicle lift or a passenger elevator. Hand Chain Hoist Sourcing does not treat a catalog series name as a finished specification.

  1. Lock the load

    Write rated capacity at a stated load center. A crate hanging from a hook is not the same as a nameplate ton on a brochure.

  2. Lock the travel

    Write lift height and hook-to-hook. A jet hand chain hoist lift line that omits travel cannot be compared to a 10 ft or 20 ft factory answer. A 1 ton unit with 10 ft travel and a 1 ton unit with 20 ft travel are different quoted extras even when the nameplate tons match.

  3. Lock the duty

    Write lifts per hour or duty class. Occasional maintenance and short-run production are different quoted extras even at the same tonnage.

  4. Lock the hang

    Write hook mount or trolley and who supplies the beam hardware. Accepting a substitute without this line is how a cheaper reply hides missing iron.

Fields that stay open until a factory answers

lb / kg

Rated capacity

Keep the same unit on every reply. Do not rank 1 ton against 2000 lb without saying they were converted.

ft / m

Lift height

State hook travel. Headroom is a separate number and belongs next to lowered height.

class

Duty cycle

Write how often the hook moves. Manual equipment is not automatically the wrong choice when power is absent.

hang

Suspension

Hook, push trolley or geared trolley. Flange width stays a buyer measurement.

Units to confirm before accepting an alternative
Check Keep on the brief Do not treat as proven
Capacity Rated capacity with units A series nickname without travel
Geometry Lift height, headroom, hook-to-hook A photo of a compact body
Site Beam capacity, aisle width, destination A dealer list
Scope Machine versus freight versus site work A single mixed price

After a match, request factory papers

Load test sheet

Ask the named factory for the sheet that matches the quoted capacity and lift. This desk does not issue that sheet.

Chain grade note

Confirm load chain grade and hook opening on the same revision the quote used.

Dimension drawing

Use the drawing to check headroom against the beam before you accept a substitute body.

1

Load line written with units

2

Travel line written as lift height

3

Duty and hang named before a substitute

These counters are checklist steps, not carbon or ESG scores and not completed installations.

Request a specification review

Send rated load, lift height, duty, quantity and destination. We will restate them for factory quotes. No discount clock is used here.

Request Factory Quotes